Product introduction
Hmc-800 type vehicle-borne CBM multi-function drilling rig is a full hydraulic vehicle-bed gas drilling machine developed by our company in the past 40 years on the basis of drilling machine research, production, manufacture and practice, according to the characteristics of domestic coal bed methane exploration and mining and combined with the advanced experience and concept of foreign coal bed gas mining. The drilling rig is mainly used in coal seam gas mining, shallow oil and natural gas drilling, oil well repair and geothermal well construction, and meets the requirements of domestic ultra deep hole exploration and drilling, and can also be used for engineering rescue, mine ventilation hole and drainage pipeline construction.
Technical features
1. the main engine adopts full hydraulic drive, special chassis for automobile, strong passing capacity, fast and convenient movement and low transportation cost.
2. the drilling arm adopts the speed doubling mechanism of mast lifting steel wire rope, which has simple structure, shortens the transportation length, increases the working stroke, and the driving head travel reaches 15m, which is convenient for various process construction.
3. the power head adopts the warpable structure, with the maximum lifting angle of 85 ° to facilitate the back and unloading of drill pipe.
4. the drilling machine is driven by low speed and high torque motor, with high operating efficiency, maximum torque of up to 20 kn? M, maximum speed of 170r/min, and power head with different parameters can be configured according to the user's process requirements.
performance parameter
1. Special vehicle chassis model ws5545h
2. Drive type 10X6
3. Drive power 276KW
4. Power head torque / speed: 20KN · m/ 85rpm
10KN·m/ 170rpm
Forward tilt angle 0-85 °
Travel: 15m
Through hole diameter 75mm
5. Lifting force / lifting speed of feed system 800kn/ 22m/min
Feed in force / feed speed 160kn/ 55m/min
6. Drilling capacity (Reference) drill pipe diameter / drilling depth φ 89/ 3200m
φ114/ 2200m
φ127/ 1600m
Turning diameter 800mm
7. Auxiliary winch lifting force 40kN
8. Diesel engine model kta19-p700
Power / speed 522kw/1800rpm
9. Hydraulic system form open
Displacement: 2x130 + 2x100 + 2x60
Pressure 32Mpa
10. Working height: 22m maximum
13.8m minimum
11. Driving capacity: maximum climbing angle: 30 °
Maximum speed of driving 70km / h
12. Transportation dimension length / width / height 13800x2850x4250mm
13. Total weight of the whole machine
54t
